Machining Route Of CNC Lathes

The machining route is the motion trajectory and direction of the tool relative to the part in the process of exponentially controlled machine tool machining.
1. It should be able to ensure the processing accuracy and surface roughness requirements;
2. The machining route should be shortened as much as possible to reduce the empty travel time of the tool.
The connection between the processing route and the processing allowance
Under the condition that CNC lathes have not yet reached the general use, the excessive margin on the blank, especially the margin containing forged and cast hard leather layers, should generally be arranged for processing on ordinary lathes. If it is necessary to use CNC lathes for processing, it is necessary to pay attention to the flexible arrangement of the program.
Fixture installation points
The connection between the hydraulic chuck and the hydraulic clamping cylinder is realized by the tie rod, and the key points of the hydraulic chuck clamping are as follows: first remove the nut on the hydraulic cylinder with the handle, remove the pulling pipe, and withdraw it from the rear end of the spindle, and then remove the chuck fixing screw with the handle, you can remove the chuck.