1. The spring chuck is used to fix and strengthen the fixed device of the parts that need to be transformed, and during daily maintenance, the spindle and chuck cone of the machine tool must be cleaned up before the cone is installed on the spindle.
2. After use, the main body and collet should be cleaned to prevent rust to ensure the smooth progress of the next use.
3. Before the body cone is installed on the spindle, scrub the chuck cone and the machine tool spindle clean, and lightly hit the end face of the body with a rubber hammer or wooden hammer to ensure tightness, firmness or tightening with the adapter.
4. According to the processing needs, select the corresponding sleeve to scrub clean, put it into the main inner hole, gently push the main body sliding cap, so that the sleeve square is placed in the square hole in the main body, and then the corresponding tool is clamped on the sleeve and clamped, which can be processed and used.
5. When the tap is put into the tap sleeve, attention should be paid to placing the square shank into the square hole in the clamp to increase the torque.
6. Gently push the sliding cap, you can first remove the sleeve (or replace), after use, clean the anti-rust, main body, collet.