Spring chuck is a kind of cylindrical fixture used to confine drills or milling cutters to a milling machine. It is a kind of fixture used to fix and reinforce the parts that need to be modified. The following is a detailed introduction by the spring chuck manufacturer accessories for you.
Before installing the spring chuck , the spring chuck must be inserted into the lock nut, and then the lock nut equipped with the spring chuck must be gently screwed on the tool holder, adapter or spindle. Be sure to clean the spring chuck and lock nut threaded parts, positioning surfaces, and cones.
During the installation of the chuck and lock nut, the chuck and lock nut must be tilted at a certain angle, and then gently placed into the lock card slot of the lock nut.
Note:
1. Pay attention to the spring chuck to clamp the knife to avoid the knife flying out in high-speed rotation and injuring people.
2. It is strictly forbidden to insert the tool lock nut in the chuck to prevent the spring chuck from deforming and brittle chipping.